Views: 74

Overhauser walking magnetometer-gradiometer MaxiMag

Product code : 1753503884

Highest precision and sensitivity Field magnetometer/gradiometer or base station Built-in multi-band GNSS receiver and flashlight Keypad for right- and left-handed people Lightest in the World Li-ion battery included MaxiMag – the World's most advanced and portable walking Overhauser magnetometer. The instrument is designed to measure magnetic field with high sensitivity and absolute accuracy. MaxiMag can be used as a walking magnetometer, two- or multi-sensor gradiometer, base station, observatory magnetometer, or even as a GNSS base and rover with centimeter accuracy in PPK mode. Console can be connected to a SmartMag magnetometers and recognizes them as a compatible sensors, so together they can be used as a walking magnetometer and a base station or as a gradiometer.

Quantity:

    MaxiMag – the World's most advanced and portable walking Overhauser magnetometer. The instrument is designed to measure magnetic field with high sensitivity and absolute accuracy.

    MaxiMag can be used as a walking magnetometer, two- or multi-sensor gradiometer, base station, observatory magnetometer, or even as a GNSS base and rover with centimeter accuracy in PPK mode. Console can be connected to a SmartMag magnetometers and recognizes them as a compatible sensors, so together they can be used as a walking magnetometer and a base station or as a gradiometer.

    Perfect mobile magnetometer or gradiometer for any task

    SmartMag_MaxiMag

    MaxiMag console permits connecting up to 30 digital Overhauser sensors or SmartMag magnetometers via a wired CAN interface. This unique feature enables building two- or multi-sensor gradiometers with the required measurement base and using any console-to-sensor distance.

    Optional brackets and frames for any scenarios:
    - Brackets for carrying two sensors in hand or in a backpack harness
    - Versatile multi-sensor frame for cross-country and shallow water archaeological surveys
    - Cart for multi-sensor gradiometer
    - Sled for magnetometer and multi-sensor gradiometer

    Easy-to-use tablet console

    MaxiMag console

    We have equipped the console with large daylight readable and heated display, a two-way keypad, modern wired interfaces and even a flashlight. The control of measured values and their quality is provided in digital, graphical, and audible modes. Line planning, operator guidance, saving of coordinates and exact times of measurements are provided by built-in multi-band GNSS receiver.

    When external GNSS receiver is required, MaxiMag supports the standard NMEA-0183 protocol and can be connected to most navigation devices. Data download is available via USB, RS-232 or from the built-in industrial microSD card. We also made sure that all our parts and connectors were non-magnetic, which allowed to reduce the dimensions of the ready-to-go magnetometer set. Maneuvering with a magnetometer in forests and jungles has never been easier!

    Magnetometer for magnetic observatories

    High sensitivity, sampling rate, and accuracy (less than 0.1 nT) allow to use MaxiMag in magnetic observatories, but a more optimal solution to this problem is provided by the digital SmartMag / OVHmag sensors. Both magnetometers support real-time data broadcasting via CAN FD or RS-232 connection. Optional CAN-Ethernet interface unit can be connected directly to the standard network equipment. The digital CAN FD line can be up to several kilometers long. The device is supplied with the SmartManager software which has all the necessary functionality to work in the INTERMAGNET network of magnetic observatories.

    Magnetometer parts and backpack harness

    MaxiMag sensors are available in two modifications:

     

    Modular

    Rigid

    Sensor vertical orientation

    +

    -

    Sensor to electronics module connection

    Connector

    Permanent

    Carry-on case

    +

    -

    MaxiMag sensor
    MaxiMag backpack with additional battery

    We recommend the rigid design for harsh environments at low temperatures where additional connectors and assembling the sensor with gloves on can be inconvenient. Modular sensors are convenient for use closer to equator and during transportation.

    The magnetometer package contains a minimum number of parts to make assembly as easy as possible, but at the same time it consists of all the necessary components, so you do not have to buy additional cables, GNSS receiver and other “options and accessories” required for regular operations. Every magnetometer we ship is ready to be used in its basic configuration. Options add functionality but are not required by most users for standard operating scenarios.

    We have also designed an exceptionally comfortable and lightweight harness with plenty of customization to fit anybody. The duffel bag can be unzipped or used to carry an additional battery, clothing or lunch.

    Power supply

    MaxiMag operates over 11 hours of continuous measurements at -30°C from the battery included. At 20°C, the operating time increases to 17 hours. Continuous power supply in long term monitoring mode can be provided with a car battery, an optional low-noise power converter from 110/220VAC to 12VDC, or a solar panel.

    Included Li-ion battery has the full temperature range from -40 up to +70°C and MSDS certificate for any kind of transportation.

    Magnetometer low noise power supply

    MaxiMag does not contain built-in batteries, that could complicate air transportation and sooner or later fail and require complex replacement.

    Data format

    User can create project folders that can be used to divide survey sites or data collection days. All measurements are saved in a TXT file in the project folder. The file from each magnetometer has a name containing the serial number of the console, the code of the measurement mode and the number of connected sensors. The files have a homogeneous structure, i.e. each measurement in the file is a line that contains all necessary information: UTC date and time, time zone, base name or line and station name, measured field, estimated error, sensor serial number, latitude and longitude in decimal degrees, altitude, UTM coordinates with automatic zone and hemisphere selection, horizontal and vertical accuracy. When working with a gradiometer, the line will contain measured field, estimated error, and sensor serial number for each of the connected sensors, and the file name will be different from the magnetometer mode, so the uniformity of the format will not be broken.

    Even if there are many operators working on a survey site at the same time, you will always be able to identify which instrument was used for each single measurement in the database.

    Metrology and noise protection - a guarantee of high accuracy

    Every MaxiMag sensor is metrologically tested. We control the standard deviation of random error (noise), absolute accuracy and heading error.

    The robust algorithms allow to perform measurements at high level of industrial noise, in a city environment, or right under high-voltage powerlines.

    Reliability and warranty

    Our R&D specialists have extensive experience in performing geophysical surveys. We are well aware that such equipment must be reliable, and the service must be fast and comfortable. We give 3 years warranty on all our magnetometers, and our technical support will promptly answer any of your questions. Our Overhauser sensors have the longest in the World lifecycle of more than 10 years. You can also take advantage of our trade-in program and replace your old instruments with the new MaxiMag.

    Built-in multi-band GNSS receiver with centimeter level accuracy

    Time and coordinates are provided by the built-in multi-band GNSS receiver with PPK feature, which allows to achieve a centimeter level accuracy. Stored RAW GNSS data could be easily converted to RINEX format. The console has GNSS receiver mode and can be used as a GNSS base, rover or tracker without mag sensor connected.

    MaxiMag has built-in GNSS antenna and a connector for an external one. It also supports NMEA-0183 protocol and can be connected to external navigation devices via RS-232.

    Important "little things"
    • Two-way keypad for both right- and left-handed people
    • Ultra-bright LED flashlight for safe navigation in the dark
    • Built-in multi-band GNSS receiver with PPK feature and base/rover modes
    • Superior noise protection allows operation even under power lines
    • More than 11 hours of continuous operation at -30°C and 17 hours at 20°C using the battery included
    • Power cable for standard lead-acid battery included
    Magnetometer-gradiometer
    Operating modes
    • Mobile survey with walking or towed style and station measurements with line guidance
    • Base station with continuous measurements
    • Search mode for UXO objects detection or evaluation of a base station location
    • GNSS receiver mode with ability to collect RAW GNSS data for a centimeter level accuracy with base or rover modes
    Application area
    Mineral exploration
    Regional geological surveys
    Engineering surveys
    Pipeline mapping
    UXO detection
    Archaeological studies
    Oil and gas exploration
    Magnetic observatory
    Basic delivery set:
    MaxiMag console with built-in multi-band GNSS receiver
    Digital Overhauser sensor OVHmag
    Li-ion battery 14.8V/4Ah with charger
    Sensor-to-console cable
    AGM battery power cable
    USB cable
    Backpack harness
    Transportation case
    Two sensors gradiometer delivery set:
    MaxiMag console with built-in multi-band GNSS receiver
    Digital Overhauser sensor OVHmag - 2 pcs
    Li-ion battery 14.8V/4Ah with charger
    Sensor-to-console cable
    Gradiometer accessories
    - Gradiometer suppor
    - Gradiometer bracke
    - Gradiometer cabl
    - Power cable extension cord
    AGM battery power cable
    USB cable
    Backpack harness
    Transportation case
    Optional:
    SmartMag base station
    Additional digital Overhauser sensors
    Gradiometer accessories
    Non-magnetic cart for multi-sensor gradiometer
    Non-magnetic tripod
    External GNSS antenna on rod
    Additional Li-ion battery
    CAN-Ethernet interface unit for connecting to PC/router
    RS-232 cable for real-time data broadcasting
    SmartManager software
    Power supply 100-240 VAC

    Type

    Overhauser magnetometer

    Number of sensors

    up to 30

    Dynamic range

    20 000 to 120 000 nT

    Absolute accuracy

    0.1 nT

    Sensor sensitivity

    0.021 nT/√Hz rms

    0.012 nT/√Hz rms (on request)

    Resolution

    0.001 nT

    Gradient tolerance

    30 000 nT/m

    Sample rates

    0.2, 0.25, 0.5, 1, 2, 3 s and longer with 1 s step 

    Sensors stability

    > 10 years

    Interfaces

    built-in: USB, RS-232, CAN FD.

    optional: Ethernet (CAN-Ethernet interface module)

    Maximum communication cable length

    up to 6 km (CAN FD), up to 100 m (RS-232)

    GNSS receiver

    built-in and optional external

    GNSS antenna

    built-in and optional external

    GNSS signals

    GPS L1C/A and L2C; GLONASS L1OF and L2OF;
    Galileo E1B/C and E5b; BeiDou B1I and B2I; QZSS L1C/A, L1S and L2C.
    SBAS: WAAS, EGNOS, MSAS, GAGAN, SDCM.

    Connectors

    2 × CAN FD+12V / RS232+12V, USB, external GNSS antenna

    Display

    240 × 128, LCD

    Membrane switch panel

    32 buttons

    Internal memory capacity

    up to 32 Gb (industrial microSD)

    Power

    9.5-21 VDC, LiPo 3S/4S, Li-ion 3S/4S, LiFePo4 4S, or lead-acid battery
    100-240 VAC, optional power unit required

    Operating temperature

    –40 to +60 °C

    Li-ion battery

    14.6 V, 4 A·h

    Flashlight

    LED, 300 lumens

    Dimensions with connectors

    930×125×72 mm – rigid sensor

    Tags:
VIDEO
Lingerie Fashion